Everything about Muzzle-loading totally explained
A
muzzleloader is any
firearm into which the
projectile and usually the
propellant charge is loaded from the
muzzle of the
gun (for example from the forward, open end of the gun's barrel). This is distinct from the more popular modern design of
breech-loading firearms.
Modern muzzleloading firearms range from reproductions of
sidelock,
flintlock and
percussion long guns, to in-line rifles that use modern inventions such as a closed breech, sealed
primer and fast rifling to allow for considerable accuracy at long ranges.
Mortars are a type of short-range artillery that are muzzle-loaded.
Muzzleloading can apply to anything from
cannons to
pistols but in modern parlance the term most commonly applies to
black powder small arms. It usually, but not always, involves the use of a loose propellant (for example
gun powder) and projectile, as well as a separate method of ignition or priming.
Loading
In general, the sequence of loading is to put in:
- Gunpowder, by pouring in loose powder, inserting a pre-measured bag or paper packet of gunpowder (called a cartridge) or by inserting (the less desirable) solid propellant pellets. The gunpowder used is typically blackpowder or blackpowder substitutes like Pyrodex.
- Wadding, made from felt, cloth or card. In shotguns, this is placed in when the ball becomes difficult to press into the barrel (in small arms). In rifles firing round ball, a lubricated patch of fabric is wrapped around the base of the ball which grips the rifling and imparts spin to the ball. In Minie rifles, no patch is used as the projectile has a base which expands to grip the rifling.
On most notably naval cannons, the wadding at the end of the barrel not only served the purpose of creating a better seal around the shot, but to also act as a plug, to stop the shot rolling out due to the swaying of the ship.
- The projectile, most typically a solid lead ball, loose shot, a Minie bullet or a jacketed modern bullet in a plastic sabot .
Since the projectiles and wads are generally tight-fitting, a
ramrod is used to push the wadding and projectile down to ensure they're firmly seated on the propellant charge. During Napoleon's time a round ball and pre-measured powder charge were wrapped in a paper casing. After a shot the user would tear the end of the paper tube off and fill the flash pan. Next he'd pour the remaining powder into the barrel followed by the ball encased in the paper wrapping. The butt of the gun was then hit on the ground and the ball would slide to the breach. A trained marksman could fire up to 3 rounds per minute.
When aiming for ultimate accuracy, muzzle-loaders are usually cleaned ("swabbed") before reloading, so that there's no residue left in the barrel to reduce accuracy, though in competitions run by the international governing body, the MLAIC, this is prohibited. However, in small arms muzzleloading rifles, swabbing is only done after every 5-10 shots. If cleaned after every shot, the barrel won't break in for hundreds of shots. Large caliber muzzle-loaders such as cannons are always swabbed between shots to prevent accidents caused by live sparks igniting the fresh charge of powder as it's being loaded.
Muzzleloading
Muzzleloading is the term used to describe the sport, or pastime of firing muzzleloading guns. Muzzleloading guns, both antique and reproduction, are used for target shooting, hunting, historical re-enactment and historical research. The sport originated in the
United States in the 1930s, just as the last original users and makers of muzzleloading arms were dying out. The sport received a tremendous boost in the 1960s and 1970s, and a flourishing industry manufacturing working reproductions of historic firearms now exists in the
United States and
Europe, particularly in northern
Italy near
Gardone.
The American
National Muzzle Loading Rifle Association holds two national tournaments a year at
Friendship, Indiana.
Further Information
Get more info on 'Muzzle-loading'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://muzzleloader.totallyexplained.com">Muzzleloader Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |